M200-RP1 Single phase reverse power relay

£ 120.00

The M200-RP1 Is a reverse power relay used on single phase or 3 phase 4 balanced load wire systems

A full range of relays is available on our main site. For enquiries please contact sales@multitek-ltd.com 

Clear

Description

The M200 reverse power relay is used to monitor
the direction of power from AC generators. If the
current in the system being monitored is reversed,
to a value greater than the customer adjustable preset
limit, the relay will energize.
The adjustable trip point is 2 to 20% of input
current. An adjustable time delay of 0 to 20 seconds
is provided. Correct setting of the trip point and
time delay will ensure protection against motoring
in the event of a generator failure and prevent
tripping due to transients encountered during
synchronizing.
A red LED indicates the state of the relay and a
green LED indicates the condition of the power supply

A full range of relays is available on our main site. For enquiries please contact sales@multitek-ltd.com 

 

Additional information

Weight 0.7 kg
Dimensions 12 × 11 × 8.5 cm
Input Voltage (L-N)

57.7V, 63.5V, 69.3V, 120V, 139V, 220V, 230V, 240V, 277V

Input Current

1A, 5A

Specifications

TECHNICAL SPECIFICATION
INPUT
Rated value Un 57.8 <500V ± 25%
Rated value In C. T operated 1 or 5A amp direct
connection 0.2 to 10A
Frequency 50 / 60 /400Hz
Burden <3VA voltage < 0.5 VA current
Overload 1.5 x Un 2 x In continuous
2x Un 10 x In for 3 seconds
SETPOINT
Range 2% to 20% reverse current
Repeatability Better than 0.5% of full span
Time delay Adjustable 200ms to 20 sec
Hysteresis 1%
AUXILIARY
All units self powered

Downloads

Brochure (Whole Range)

 

Full Product Range

Current, Volts, Frequency, Reverse Power, Synchronising, Phase Sequence, Phase Balance, Speed Sensing, DC Trip, Thermocouple, Thermistor Trip, Millivolt Trip, DC Voltage Trip, 3 Input RTD, 6 Input RTD